Installing two-post lifts
In either case, you should take certain steps to ensure your installation goes smoothly whether you are replacing or adding a 2 post lift. The following guide will guide you through some of the key steps you should take, such as checking the length of your columns and pounding in anchor bolts.
Drilling holes
There may be holes you have to drill for a lift depending on its installation. The size and depth of these can vary. You should speak with your lift manufacturer to determine what you're dealing with. You can often rely on specifications provided by the manufacturer. It's even possible that an electrician will be necessary to complete the task.
The biggest hole you will need to drill is on the main side of the lift. Some holes may already be drilled in the base plate, so you may be able to use those. In that case, you'll need a hammer and punch.
You should consult the specifications of your lift manufacturer when choosing a drill bit. In order for the operation to be successful, it is crucial to use the right bit. 4 post car lifts homepage to set up a mud jacking pad on each side of the lift once you have the bit. It can be up to four feet by two feet in size.
Pounding in anchor bolts
If you're installing a two-post lift or relocating a pallet rack, anchor bolts probably aren't the first thing on your mind. With a hammer, you can break concrete without a concrete breaking machine. It is not necessary to pound in the anchor with the longest name, however.
Make your anchor's diameter half a centimeter larger than the hole you drill. While inserting the anchor, this allows you to drop the most amount of material into the hole. Before installation, the hole should be cleaned of debris.
A SDS Max rotary hammer makes drilling concrete easy. Besides making mounting plates holes, it is equipped with a 3 / 4-inch chuck. Heavy Duty Car LIfts tipped hammer is ideal for more precise drilling. It comes with ANSI certification and is specifically designed for concrete fastening.
Identifying parallel columns
When using a two-post lift for routine maintenance or a major project, be sure to align the columns parallel to each other. It is possible to level the lift pads by shimming the columns. There is no need for the columns to be perfectly plumb, but they should be parallel to each other. Unbalanced column spacing will result in an unfavorable distribution of weight. It will increase the lift's stress.
Measuring the pad to pad measurement from left to right is one of the main ways to determine if the columns of a two-post lift are parallel. The weight of the vehicle will be evenly distributed between the four arms of the vehicle by this method.
A lifting column can be used to check if the columns of a two post lift are parallel. From their original starting position, the arms will be raised by 178 degrees.
Taking care of your lift
It is important to maintain the safety mechanisms on your 2 post lift. In selling scissor car lifts , you can ensure the safety of yourself and your property. Performing these steps on a regular basis is essential.
It is important to check all the moving parts of the lift. In addition to these, the lift cables, carriages, pulleys, and lubricants also need to be maintained. You should replace any of these damaged parts.
Check the hydraulic connections for leaks as well. Lifts with leaks in hydraulic fluid should be serviced as soon as possible.
To keep the cables from being stretched, inspect them regularly. Having stretched cables can result in uneven rises in lifts. In addition to lubricating the cable pulleys and chain rollers, it is also a good idea to make sure they are clean. Using 85WT gear oil or ALMASOL wire rope lubricant will keep the cables lubricated.
Additionally, hydraulic fluid needs to be cleaned. As a result, the lift's ability to lift and lower vehicles is maintained.
Mechanic Superstore
1419 N Midland Blvd, Nampa, ID 83651
Phone: (866) 774-7743
https://www.mechanicsuperstore.com/